|
Product Detail :
|
Supply of CI CS Casted Items, C.i. Casted Items (new Basis), C.i. Idler for Cane Carrier (i) as Per Drawing No. Ksc/cc1/4/17 , C.i. Pulley (as Per Drawing) with Machining, C.i. Coupling Different Size (as Per Drawing), C.i. Casting Various Size (gulla) as Per Drawing with Rough Machining. Different Size , Cast Steel Spur Gear & Pinion New Basis , Cast Steel & Spur Gear- 72 Teeth Face Width- 75mm, Bore- 50mm Od- 473 Mm, Module- 6.4. Approx Weight 90 Kg , Cast Steel & Spur Gear- 26 Teeth Face Width- 75mm, Bore- 45mm Od- 178.24 Mm, Module- 6.4- Approx Weight 11.6 Kg , Cast Steel Pinion- 24 Teeth Face Width- 70mm, Bore- 45mm Od- 166.4 Mm, Module- 6.4 -approx Weight 9.7 Kg , Cast Steel Pinion- 34 Teeth Face Width- 75mm, Bore- 40mm Od- 308 Mm, Module- 8.56. Approx Weight 20 Kg , Cast Steel Gear Pinion- 50 Teeth as Per Drg No. Mills-138approx Weight 11 Kg , Cast Steel Sprocket- 13 Teeth 6” Pitch as Per Drg. Mills-27 , Cast Steel Pinion- 18 Teeth Face Width- 75mm, Bore- 45mm Od- 128 Mm, Module- 6.4.approx Weight 5 Kg , C.s.scaper for Mills Duly Machined as Per Sample Drg.no Ksc/mh/91618 Approx Wt-190kg Each, Cast Steel Trash Plate (lenth 1680 Mm) Made of is 2708 Grade Iii Duly Rough Machined as Per Drg.no – Ksc/mh/285/22, C.s. Wheel for Cane Unloader Bridge as Per Drg.no. Ksc/unloader/2/17.approx Wt 185 Kg., C.s Gear 68 Teeth, Module-6.14 Face Width-65mm, O.d--430mm Drg No.-ksc/unloder/17, C.s.wheel for Cane Unloder Trolly Drg No.-ksc/cr/145 Approx.wight-55kg, C.s.pinion-18teeth, Module-6.14, F.w-65 Od-122.8 Drg. No.-ksc/unloder/17, C.s. Sprroket 6" Pich 14 Teeth Drg No.-ksc/m/1565 (tail End) Material 2708, C.s. Sprroket 6" Pich 14 Teeth Drg No.-ksc/m/1564 (driving Shaft) Material 2708, C.s.sproket-36 Teeth for Duplex Chain 2 1/2" Pitch Material 2708 Drg No Ksc/boiler-163, C.s. Sprocket 17 Teeth for Duplex Chain 2 1/2" Pitch Material 2708 Drg No-ksc/mill/4887, Opertuinity Device of Trash Turner Beam Material-ss Drg No. Mills-8488, C.s. Pinion Duly Hardent Tempered and Grinded- 24 Teeth, Module-10, Fw-110mm Od-260mm Bore-50mm, C.s. Pinion Duly Hardent Tempered and Grinded- 24 Teeth, Module-8, Fw-120mm Od-208 Mm Bore-50mm, C.s.worm Shaft ( as Per Sample) for Mill, C.s. Mill Coupling (weight 700kg Approx) as Per Drawing, C.s. Mill Crown Pinion 16 Teeth (weight 1500 Kg.) as Per Drawing, Cast Steel Spur Gear & Pinion on Conversion Basis, Cast Steel & Spur Gear- 72 Teeth Face Width- 75mm, Bore- 50mm Od- 473 Mm, Module- 6.4. Approx Weight 90 Kg , Cast Steel & Spur Gear- 26 Teeth Face Width- 75mm, Bore- 45mm Od- 178.24 Mm, Module- 6.4- Approx Weight 11.6 Kg , Cast Steel Pinion- 24 Teeth Face Width- 70mm, Bore- 45mm Od- 166.4 Mm, Module- 6.4 -approx Weight 9.7 Kg , Cast Steel Pinion- 34 Teeth Face Width- 75mm, Bore- 40mm Od- 308 Mm, Module- 8.56. Approx Weight 20 Kg , Cast Steel Gear Pinion- 50 Teeth as Per Drg No. Mills-138approx Weight 11 Kg , Cast Steel Sprocket- 13 Teeth 6” Pitch as Per Drg. Mills-27 , Cast Steel Pinion- 18 Teeth Face Width- 75mm, Bore- 45mm Od- 128 Mm, Module- 6.4.approx Weight 5 Kg , C.s.scaper for Mills Duly Machined as Per Sample Drg.no Ksc/mh/91618 Approx Wt-190kg Each, Cast Steel Trash Plate (lenth 1680 Mm) Made of is 2708 Grade Iii Duly Rough Machined as Per Drg.no – Ksc/mh/285/22, C.s. Wheel for Cane Unloader Bridge as Per Drg.no. Ksc/unloader/2/17.approx Wt 185 Kg., C.s Gear 68 Teeth, Module-6.14 Face Width-65mm, O.d--430mm Drg No.-ksc/unloder/17, C.s.wheel for Cane Unloder Trolly Drg No.-ksc/cr/145 Approx.wight-55kg, C.s.pinion-18teeth, Module-6.14, F.w-65 Od-122.8 Drg. No.-ksc/unloder/17, C.s. Sprroket 6" Pich 14 Teeth Drg No.-ksc/m/1565 (tail End) Material 2708, C.s. Sprroket 6" Pich 14 Teeth Drg No.-ksc/m/1564 (driving Shaft) Material 2708, C.s.sproket-36 Teeth for Duplex Chain 2 1/2" Pitch Material 2708 Drg No Ksc/boiler-163, C.s. Sprocket 17 Teeth for Duplex Chain 2 1/2" Pitch Material 2708 Drg No-ksc/mill/4887, Opertuinity Device of Trash Turner Beam Material-ss Drg No. Mills-8488, C.s. Pinion Duly Hardent Tempered and Grinded- 24 Teeth, Module-10, Fw-110mm Od-260mm Bore-50mm, C.s. Pinion Duly Hardent Tempered and Grinded- 24 Teeth, Module-8, Fw-120mm Od- 208 Mm Bore-50mm, C.s.worm Shaft ( as Per Sample) for Mill, C.s. Mill Coupling (weight 700kg Approx) as Per Drawing, C.s. Mill Crown Pinion 16 Teeth (weight 1500 Kg.) as Per Drawing.
|